Next New Arrival--X4Q Comet

Product details

Description

Introducing the new NOV-Mu V2. We paired high-CRI emitters with the incredible Lume1 high-efficiency constant current driver electronics to create the ultimate mule flashlight. Perfect for photography, widefield, and flood illumination. Often copied, never replicated. 

  • New optimized size - 107mm (reduced from 114mm)
  • New Firefly Magnetic USB-C Cover (Patent 2023235776065)
  • New Firefly High CRI Emitter Options (FFL351A series)
  • Toughened Micro-Arc Oxidation Finishes:
    • Fossil Grey MAO, Dark White MAO
  • Anodization Finishes:
    • Matte Black HAiii
  • Anodized T-cut Threads
  • Improved E-Switch Design

Features

  • Compact Size - 107mm x 32mm x 26.5mm 
  • Weight - 104g (without batteries)
  • 21x E21A or 9x FFL351A High CRI LED Emitter Configurations 
    • Max Output: 6000 Lumens (depending on emitter choice and battery used)
  • Battery - unprotected flat-top 21700 (not included, recommended to use high-drain cells including Molicel P42, P45, P50, or Samsung 40T, 50S, or Vapcell T50)
  • RGB Auxiliary (front), Illuminated Blue Side Switch with Red Charging Indicator
  • CNC Construction, 6063-T6 Alloy, PVD-coated Stainless Steel Bezel
  • Optimized Emitter Placement for Flood Illumination
  • Lume1 6A High Efficiency Constant-Current Buck Driver (over 90% efficiency) with FET Turbo and UDR (Ultra Dynamic Range)
  • Be-Cu Silver-Plated Springs
  • Toughened Front Glass Lens, AR Coated (~98% transmittance)
  • 2A Fast Charging, Firefly Patented Magnetic Type-C Port (Patent 2023235776065)
  • Magnetic Tail Cap (optional)
  • Water Resistance - IPX8 

Included Accessories

  • 1x SS Clip
  • 1x Lanyard
  • 1x White Rubber Diffuser
  • Spare O-rings

All NOV-Mu V2 flashlights come with a standard tailcap with the same finish as the body. An optional black PVD-coated magnetic tailcap is available separately (order here). 

Runtime* Table

Mode

Brightness

Runtime

Moon

<0.001 lm

months

Low

50 lm

2.5 days

Mid2

300 lm

13 hrs

Mid1

800 lm

4 hrs

High

1600 lm

3.3 hrs

Turbo @ 0s

6000 lm

3 hrs

Turbo @ 30s

1400 lm

Temp. Regulated

Turbo @ 10m

720 lm


*Vapcell 21700 T50 Battery


    User Interface: (Anduril V2)

    This flashlight uses the open-sourced Anduril user interface. 

    By default, this flashlight begins in Simple UI with 5 brightness levels. Enter the hidden Advanced UI to access additional features and more configuration options. Details can be found in Anduril User Guide

    Charging

    NOV-Mu V2 features an intelligent 2A battery charger. For optimal charging, use a USB-C port that can source at least 5V 2A. Upon the start of charging, the side-switch illuminates red. When charging is complete, the red indicator turns off. A flashing red indicator indicates a charge fault.

    For battery safety, cells below 3V are pre-charged at 100mA before the full 10W charge starts, transitioning to constant voltage, and ending with trickle-charging. The charger includes a 10-hour safety timer to prevent extended charging.

    While not recommended, the flashlight may be used while charging, but if operated at higher power levels than the charging rate, the battery will not be charged. 

    Battery Level Indicator

    Anduril2 UI uses the front RGB auxiliary LEDs to indicate the current battery level upon turn-off. The colors correspond as follows:

    This post-off display can be turned off or configured in Anduril. 

    Anduril 2 is an open-sourced software and distributed under the terms of GPLv3. The source can be accessed here

    Operation Notes

    • The NOV-Mu V2 is a high-performance flashlight and can generate a lot of heat during operation. Please understand that this is not a toy and should be handled with safety.
    • To prevent accidental activation of the flashlight, it is recommended to lock-out the flashlight (4 clicks from off to lock or unlock) before storage, or unscrew the body slightly as a mechanical lock-out. 
    • The NOV-Mu V2 has low-voltage protection which cuts off power at 2.8V. It is recommended to begin recharging the cell before this happens to increase battery longevity.