L50 Sol - EDC Right-Angle Flashlight
Pairs well with
L50 Sol - EDC Right-Angle Flashlight
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Product details
Description
A New Angle.
Features
- Body Size - 97.5mm x 27mm x 21.5mm
- Weight - ~54.5g (without batteries)
- Battery - unprotected flat-top 18650 (not included, recommended to use high-drain cells, see below)
- RGB Auxiliary Illuminated RGB Switch
- CNC Construction, 6063 Alloy, Stainless Steel Bezel and Switch
- Open-Source Anduril2 User Interface / Firmware
- Lume X1 Boost Driver (30W), Constant Current Regulated (up to 95% efficiency) with UDR (Ultra Dynamic Range)
- Automatic Thermal Regulation (45C default), Low Voltage Cut-off, Reverse Polarity Protection
- Be-Cu Beryllium Copper Silver-Plated Springs
- One-side sanded Toughened Front Glass Lens, AR Coated (~96% transmittance)
- N52 Removable Tail Magnet
- Water Resistance - IPX8
- Drop Resistance - 1.5 meters
Included Accessories
- 1x Headband
- 1x Two-way Stainless-Steel Clip
- 1x Lanyard
- Spare O-rings
User Interface: (Anduril V2)
This flashlight uses the open-sourced Anduril user interface. Anduril 2 is an open-sourced software and distributed under the terms of GPLv3. The source can be accessed here.
By default, this flashlight begins in Simple UI with 5 brightness levels. Enter the hidden Advanced UI to access additional features and more configuration options.
Details can be found in Anduril User Guide.
Battery Level Indicator
L50 uses the RGB auxiliary switch LEDs to indicate the current battery level upon turn-off. The colors correspond as follows:
This post-off display can be turned off or configured in Anduril.
Operation Notes
L50 Sol is a high-performance flashlight capable of up to 30W and generates a lot of heat. Please note that this flashlight is not a toy and must be operated responsibly.
L50 uses the high-performance Lume X1 driver. For best performance, recommended to use low ESR, high CDR 18650 unprotected cells: - Molicel P30B, P28B, P28A, P26A (grey) - LG HJ2 (lilac), HG2 (brown) - Samsung 20S (blue), 30Q (pink) - BAK N18650CNP (pink) - Murata/Sony VTC5A (green). Batteries are not included.
To prevent accidental activation of the flashlight, it is recommended to lock-out the flashlight (4 clicks from off to lock or unlock) before storage or unscrew the body a quarter turn as a mechanical lock-out.
This flashlight has low-voltage protection which cuts off power at 2.8V. It is recommended to begin recharging the cell before this happens to increase battery longevity.
The Lume X1 driver (Rev B with AVR32DD20 MCU) features UPDI flashing pads for advanced users to perform their own firmware updates or to flash custom firmware binaries.